|
Richard T. Byrnes Co., Inc. has a
large inventory of quality used machinery available for purchase. Below
you will find a few of these machines with pictures. You may also click
here to view our current
Stock Inventory.
We try to keep this list up-to-date. All equipment is subject to prior
sale. Let us know if there is a particular machine you are interested in
that is not listed. Please specify a manufacturer and model number when
possible.
If you need more information, please call
Patty Colpo. Phone # 610-692-2770 x 16 or Email
patty@rtbyrnes.com
|
 (3) SawStop
CB53480 10" Table Saws with 5HP 3PH, 480v motor, 50"
fence system with table board
extension, 3-1/8" max. depth of cut & includes manuals and guards.
(1) saw includes an Excalibur Sliding Table.
|
 Accu-Systems
DD Dowel Inserter, air operated with Dowel diameter 1/4” to 3/8”, Dowel length 1” to 1-1/2”, 110 vac power required, 80-100 psi,
Micro-Processor valve controller, Caster mounted cabinet, and
weighs 175 lbs. |
|
 Oliver
88-D Table Saw with Sliding Table 14", 5HP 3PH, 220 volt motor, 50"
rip capacity, table size 59"W x 44"D, 14" blade capacity with 1"
diameter bore and weighs approximately 2200 lbs.
|
 Nichols
Cleat Block Machine with (3) horizontal drills on each side, 1.5HP
8" diameter saw with 2" dust opening, and 1HP belt driven motor for
spindles. |
|
Nichols Corner Block Machine w/2
Horizontal direct drive single spindle motors & Vertical direct
drive single spindle 3HP motor, 12" diameter saw w/3" dust opening,
and production 10-12 blocks per minute.
|
Tannewitz GH Bandsaw 36" with 5HP
3PH, 440 volt motor, table size 36"x37", foot brake, push button,
20" under guide capacity, blade length 19'6", and cast iron base
construction. |
|
 Zeno
ZTLL 420x750 Wood Waste Grinder with 7.5 kilowatts-approximately
10HP 3PH motor, small hydraulic pump, and rotor diameter 200mm.
|
 Mereen
Johnson 412 Gang Rip Saw with 60HP 3PH direct drive motor, 12"
arbor, 3HP 3PH variable speed drive motor, top & bottom
anti-kickback fingers, Includes Allen Bradley control panel,
7'Lx7'Wx5-1/2'H, & weighs approximately 9100 lbs. |
SPECIAL PRICING STOCK USED EQUIPMENT
BELOW-- SUBJECT TO
PRIOR SALE.
|
Delta 15" Drill Press 15-665 3/4HP 3PH, 220 volt. $350 Special $250 |
Scheer DB4 Dowel Hole Drilling Machine
32mm system. $14500 Special $12500 |
Powermatic 180 Planer 18" capacity,
5HP 1PH, 220 volt. $3725 Special
$3200 |
|
Rockwell 15" Drill Press 15-655 3/4HP 3PH, 220 volt. $350 Special $250
SOLD |
State 15" Disc Sander 1HP 3PH motor.
$1350 Special $850 |
Maxi RPO Phase Converter 7.5 HP 3PH,
230v. $850
Special $800 |
|
SAC 20" Planer RS-53 9HP 3PH, 460V. $6500
Special $3900 COMMITTED |
Omga TR2 Double Miter w/two 2.2HP 3PH,
440V motor. $6950 Special $6000 |
Virutese Cutter Special $100
Transfer Carts capacity 4400 lbs.$850
Special $500
(4) Auto Blast Gates 4". $750
Special $400 |
|
